Instructions on how to apply and remove Bluesky UV/Gel:

PLEASE NOTE: YOU NEED A UV/ LED LAMP TO DRY THE UV/GEL POLISH!!!

Curing time for each layer will depend on the strength of your lamp

LED: 3watt – 2min; 12watt – 1min; 48watt – 30 seconds. UV: 36watt – 2min

NOTE: Do not remove the sticky residue left by each layer until the end as this helps the layers to adhere better to the nail.

      Application:

• Step 1: Sanitise, prep and push back cuticles
• Step 2: Gently remove the shine from the nails by using a 100/180 buffer in the direction of nail growth
• Step 3: Apply Bluesky Base Coat in a THIN application from cuticle to free edges and seal the edges of the nail.
• Step 4: Place hand in: LED UV Lamp for 60 seconds; or UV Lamp for 2 minutes
• Step 5: Apply Bluesky UV/Gel Colour in a THIN application from cuticle to free edges and seal the edges of the nail.
• Step 6: Place hand in: LED UV Lamp for 60 seconds; or UV Lamp for 2 minutes
• Step 7: Repeat Steps 5 & 6
• Step 8: Apply Bluesky Top Coat in a THIN application from cuticle to free edges and seal the edges of the nail.
• Step 9: Place hand in: LED UV Lamp for 60 seconds; or UV Lamp for 2 minutes
• Step 10: Wipe off the tacky layer with at least 99% isopropyl alcohol for a durable, shiny finish.

      Soaking Off:

• Step 1: Use 180 grit file. Gently file the surface of the gel polish to break the seal and remove the shine.
• Step 2: Saturate a small piece of cotton wool in 100% Acetone and place onto each nail. Cover each finger tip with foil and wrap tightly. Leave on for a minimum of 15 minutes before removing.
• Step 3: Remove foil one finger at a time, and gently remove the polish, using an orange stick.
• Step 4: Use 220/280 buffer to lightly buff surface of nail.
• Step 5: Apply hand and nail nourish cuticle oil.